Over the last few years, the network coverage of major mobile network providers across the UK, EU and other parts of the globe have grown substantially. We can now talk on our smartphones and surf 3G and 4G mobile internet in places like elevators, and subways. In spite of these efforts, network providers have not yet been able to alleviate the issues of poor connectivity and provide their customers with the best phone signal. Residents of remote and rural areas, owners and customers at busy shops situated in the basement, are still suffering from poor connectivity issues, which plague their communication. And so far, these network providers do not have any solid strategy. In situations like these, mobile phone signal repeaters come in real handy.
Installing a signal amplifier is not difficult. However, you may always need some sort of technical advice, for which we suggest you to go through the operating manual first. Feel free to download the manual online from the relative downloads page of our signal repeaters. In order to install it, here are some steps that you can take:
It is important to know what is included in the kit:
Listed below are installation steps:
Find a suitable location for installing the external antenna.
Requirements:
Practice the following precautions regarding the internal antenna. It should be:
Connect the mobile booster with the power device.
Some signal repeaters come with built-in power supply. Refer to the instructions manual for more details.
If the device is successfully installed, plugged in, and turned on, you will see an LED light turned on.
Note: Only plugin your booster once the entire installation is completed. Do not take any risks of installing with the power supply on as it could be hazardous.
Check your smartphone’s network coverage
If the 4G amplifier is working fine, you should notice considerable results and boost in signals. Ideally speaking, you should have no less than 4 bars on your display. If you are experiencing no improvements, try changing the position of the internal and external antennas.
Important notes for installation:
Although the coverage of network providers across the UK, Ireland and EU has considerably improved, the rapid urbanisation of cities has made it extremely challenging for network companies to ensure consistent coverage. This is evident in areas with big buildings and apartments where the population is extremely dense and concentrated. Hence, in concentrated areas like these, mobile phone signal amplifiers are very helpful. They boost mobile phone signal and ensure stable connection even inside large buildings.
We have designed the installation process of our repeater models to be extremely user-friendly. However, despite this, we understand that some of our customers may have certain issues. That’s why we always suggest downloading the related user manual of the signal repeater model and reading it carefully before installation.
Installing a signal amplifying system is not difficult. However, you may always need some sort of technical advice, for which we suggest you to go through the operating manual first. You can download the manual online from the relative downloads page of our signal repeaters.
Here is a complete list of the items packed in the installation kit:
Here are installation steps:
Find a suitable location for installing an outdoor antenna.
Requirements:
Plug in the external and internal antennas to the booster from BS and MS sides, respectively, and fasten tightly.
The indoor antenna should be:
Connect the booster box to the Power Supply.
Some signal amplifiers come with built-in power supply. Refer to the instructions manual to ensure what type of model you have. If the signal amplifying device is successfully installed, plugged in, and turned on, you will see an LED light turned on.
Note: Only plugin your booster once the entire installation is completed. Do not take any risks of installing with the power supply on as it could be hazardous.
Check your smartphone’s network coverage
If the signal booster is working fine, you should notice considerable results and boost in signals. Ideally speaking, you should have no less than 4 bars on your display. If you are experiencing no improvements, try changing the position of the internal and external antennas.
Important notes for installation:
Practically speaking, many people spend half of their days driving cars, which is particularly true for urban areas with regular traffic jams. While network coverage has improved significantly over the last few years, you may still be stuck in an area with no signals.
Weak signals while driving are often a result of shadow effects of buildings and power wastage of other wireless networks among others. A reliable solution for getting the best mobile signal UK is having a signal repeater installed in your car, designed for improving signal strength in crowded and remote areas.
The process of installing a phone booster is not difficult. However, we would strongly recommend you to download the user manual or read this article to make sure that you have followed the right steps of installation. Get in touch with our Team Managers if you are stuck at any point of installation.
If the LED lights turn on (green), it means you have successfully installed the booster.
NOTE: do not switch on the booster before it is completely installed.
Test your smartphone’s network coverage. After installation, we recommend waiting for a few minutes to noticesignal improvements. You should see no less than 4 bars on your smartphone after installing the booster.
Fed up with poor mobile phone signal? We have a solution to your problem!
All you need to do is to get in touch with our qualified managers and you will forget about network problems once and for all!
[email protected], +448000698689 (Sales), Sales Chat