Accessories for Mobile Signal Boosters

Inside Ceiling Antenna

An extra antenna can be an ideal way out for expanding the signal boosting possibilities of your device. One of the best choices would be 3dBi non-directional ceiling antenna, which can be used to boost any voice or data signal within 806-960/1710-2170/2520-2690 bands and is a great extra to any of our mobile boosters. The Ingress Protection Code is IP55. Supplied with a 5m cable.

Inside Panel Antenna

The issue of bad quality signals can be tackled easily with the aid of 8dbi indoor panel antenna, which supports 806-960 MHZ / 1710-2690 MHz frequency bands, processing all kinds of signals: GSM/4G/5G. The Ingress Protection Code is IP55. It disseminates the signal in a directional way and is normally attached to a wall. Can be used with all devices. Cable is provided.

Flat Indoor Ceiling Antenna NS-FA-3D

The Nikrans NS-FA-3D is a low-profile, ceiling-mount antenna designed for indoor use. Its sleek, flat profile is a key feature, allowing for simple and discreet installation even in compact spaces. Weighing just 300 grams, it is exceptionally easy to mount. This omnidirectional antenna operates across a broad frequency spectrum (698MHz - 4000MHz), ensuring full compatibility with all Nikrans 5G, 4G, 3G, and GSM signal boosters. It offers a gain of 3dBi with a 50-Ohm impedance and comes equipped with a 5-meter cable for flexible placement.

Inside Whip Antenna

If you need the poor signal to be amplified and boosted within a big indoor area, you will probably have to use an additional inside antenna. It’s been created with the express aim of amplifying signals indoors, so its main features are omni-directional signal spreading, 3dBi and GSM/4G/5G signal distribution within 806-960/1710-2170/2520-2690 bands. The Ingress Protection Code is IP55.

Outside Beautification Yagi Antenna

This directional antenna is a perfect device for exterior usage that can combat bad signal in your house once and for all. 9.5dBi Yagi antenna operates within 806-960 MHZ and 1710-2690 MHz frequencies, boosting effectively GSM, 4G and 5G signals. It is compatible with any repeater. Provided with a 10m cable. The Ingress Protection Code is IP55.

Outside Panel Antenna

The outside panel antenna is without doubt one of the best antennas for improving and boosting the mobile signal. The antenna possesses a gain of 8dbi. The Ingress Protection Code is IP55. A special, one-of-a-kind feature of this antenna lies in the Dual-Band mode support, meaning that it can work within both 806-960 MHZ and 1710-2690 MHz frequency bands. It disseminates the signal directionally. Works will all mobile phone boosters from our store. 10m cable is also provided.

Outdoor Wide Band Yagi NS-LPDA-12D

The Nikrans NS-LPDA-12D is a high-performance Yagi antenna engineered for superior outdoor cellular reception. Designed for wall mounting, it delivers robust signal gains of up to 12 dBi. This antenna operates effectively across the 698–2700 MHz frequency range, covering major 4G and 3G bands. Built to withstand the elements, it features a durable IP55-rated housing for protection against dust and water jets. For immediate setup, the package includes all necessary mounting hardware and a pre-attached cable.

Omni-Directional Boat Antenna NS-Boat-12D

The Nikrans NS-Boat-12D is a sensitive, omnidirectional antenna engineered for marine environments. It excels at capturing faint cellular signals that are often undetectable by standard mobile devices, ensuring you stay connected even offshore. This lightweight and fully waterproof (IP55 rated) antenna is built to withstand harsh marine conditions. It is universally compatible with all marine-grade mobile signal boosters featured in our online catalog and comes complete with a cable for straightforward installation. With a powerful gain of 12dBi, it significantly enhances your vessel's signal reception.

2-Way Splitter

A 2-way splitter will be a perfect match for you and your signal booster, if the coverage area of signal amplification is more than one room. Working within 698-960MHz and 1710-2690MHz, it can improve bad mobile signal in your house or any other building of your choice. The Ingress Protection Code is IP55. Suitable for all repeaters. 2m cable is included.

3-Way Splitter

If you want to make your signal booster as powerful as possible, so that it could allocate the improved signals in 3 and more rooms, 3-way splitter is a perfect solution. This accessory device is used very often in large houses, shops and offices. Compatible with 698-960 MHz and 1710-2690 MHz freqs. The Ingress Protection Code is IP55. 2m cable is included.

4-Way Splitter

If you are looking for a splitter that can be used in really big buildings, have a look at a 4-way splitter, which can disseminate the signal in four directions at the same time (within 698-960 MHz & 1710-2690 MHz). All devices are compatible with this extra. The Ingress Protection Code is IP55. 2m cable is included.

5/6dB cavity coupler NS-CP-6D

The Nikrans NS-CP-6D is a cavity coupler designed for cellular frequency ranges from 698 MHz to 2700 MHz, featuring an N-type Female connector. This unit minimizes mobile signal power loss when distributing a signal to multiple antennas in a series configuration, offering a coupling value of 5/6 dB. With its IP55 waterproof rating, it is built for durability, though it is recommended for indoor installation as part of a booster system. This accessory is essential for optimizing multi-antenna signal distribution networks.

7/8dB cavity coupler NS-CP-8D

The Nikrans NS-CP-8D is a high-performance cavity coupler for the 698~2700MHz frequency range, featuring an N-Type Female connector. It is engineered to eliminate power loss, which can degrade signal quality when transmitting between multiple antennas in a series. With a coupling value of 7/8 dB, this waterproof (IP55 rated) accessory is an essential component for multi-antenna installations of GSM, 4G LTE, and 3G signal repeaters. It is guaranteed to be fully compatible with all booster systems available in our catalog.

10/15/20dB cavity coupler NS-CP-15D

The Nikrans NS-CP-15D is a versatile cavity coupler for the 698~2700MHz band, featuring an N-Type Female connector. It offers a selectable coupling value of 10, 15, or 20 dB, providing high-power signal distribution for complex multi-antenna systems. This component is engineered to prevent signal power loss, ensuring optimal signal integrity when transmitting between a series of antennas. It is universally compatible with all mobile signal boosters, including those for GSM, 4G LTE, and 3G networks, making it an ideal solution for advanced repeater installations.

Cable for GSM, 4G/LTE, 5G (5m)

It is a 5-meter-long superior coaxial cable which can be used for many purposes. It works well with mounting mobile boosters and different frequency bands (kinds of signal): 900MHz (GSM), 1800 MHz (DCS), 1900 MHz (PCS), 2100 MHz (4G, 5G), and others , also Dual Bands , TriBands, MultiBands. Its maximum strength is 73 kg and its wave impedance is 50 ohm. The Ingress Protection Code is IP55.

Cable for GSM, 4G/LTE, 5G (10m)

10-meter-long superior multi-purpose coaxial cable. It works well with mounting mobile boosters and various frequency bands (kinds of signal): GSM, 5G, 4G LTE. Its maximum strength is 73 kg and its wave impedance is 50 ohm. The Ingress Protection Code is IP55.

Cable for GSM, 4G/LTE, 5G (15m)

This cable is for both inside and outside usage, and can work together with any mobile signal repeater from Mobile Signal Boosters for various frequencies: GSM, 4G LTE, 5G. It is a 15-meter-long cable that has a great shielding factor and resistance of insulation. The Ingress Protection Code is IP55.

Cable for GSM, 4G/LTE, 5G (20m)

This is a physical foaming coaxial cable which is typically useful for telecom, radio and broadcasting. Possesses a wave impedance of 50 ohm. The Ingress Protection Code is IP55. Can be used with all the repeaters for GSM, 4G/ 5G signals (or a combination of them). To reach better effectiveness, we advise on using this cable only with high-power devices, as opposed to standard ones. Also it is mainly aimed for exterior usage.

Cable for GSM, 5G, 4G and 3G COAX-3D-FB-5M

The COAX-3D-FB is a high-quality coaxial cable designed for universal compatibility with all GSM, 3G, 4G, and 5G mobile signal boosters available on our website. To suit various installation needs, we offer this cable in multiple lengths. For optimal performance, we recommend selecting the shortest cable length that meets your requirements, as excessively long cables can lead to significant signal power loss.

10m Coaxial Cable for Signal Boosters

This 10-meter coaxial cable is a reliable 50-ohm solution, fully compatible with all 5G, 4G, 3G, and GSM mobile signal boosters on our website. To maintain optimal signal strength, we advise against using excessively long cables with standard boosters. For best results, reserve longer cable runs like this for use with advanced high-power amplifiers, as basic models may experience significant signal attenuation over this distance.

15m Cable for 5G, GSM, 4G and 3G COAX-3D-FB-15M

This 15-meter COAX-3D-FB coaxial cable is a reliable, 50-ohm component designed for full compatibility with all our 5G, 4G, 3G, and GSM signal boosters. Please note that using cables of this length can lead to signal attenuation. To ensure optimal system efficiency, we recommend reserving this 15m cable for use with advanced high-power booster models, as basic boosters may not compensate for the inherent signal loss over this distance.

20m Cable for 5G, 4G ,GSM and 3G COAX-3D-FB-20M

This 20-meter COAX-3D-FB coaxial cable is a durable and reliable 50-ohm solution, featuring an IP55 rating for protection against dust and low-pressure water jets. It is fully compatible with all our 5G, 4G, 3G, and GSM signal boosters. Due to its significant length, which can cause signal attenuation, this cable is specifically recommended for use with advanced high-power booster systems. Using it with basic models may result in a noticeable loss of signal strength and reduced overall performance.

Cable for GSM, 5G, 4G and 3G COAX-7D-FB-10M

The COAX-7D-FB-10M is a high-quality, low-loss coaxial cable designed for universal compatibility with all our mobile signal boosters for GSM, 3G, 4G LTE, and 5G networks, ensuring reliable performance for both voice calls and mobile internet. To preserve the quality of the amplified signal and prevent degradation, it is crucial to select a cable of appropriate length. This 10-meter option provides an optimal balance between reach and signal integrity for many standard installations.

40m Cable for GSM, 5G, 4G and 3G COAX-7D-FB-40M

This 40-meter physical foam coaxial cable is engineered for professional applications, including radio communication, broadcasting, and networking. It features a 50-ohm impedance and is fully compatible with all our boosters supporting GSM, 3G, 4G, and 5G networks. Due to the significant signal loss inherent to cables of this length, it is strongly recommended for use exclusively with advanced, high-power booster systems to ensure optimal performance and efficiency. Basic booster models will not adequately compensate for the signal attenuation.

50m Cable for 5G, GSM, 4G and 3G COAX-7D-FB-50M

This 50-meter physical foam coaxial cable is engineered for demanding professional applications such as radio communications, broadcasting, and networking. With a 50-ohm impedance, it is universally compatible with all our mobile signal boosters for 5G, 4G, 3G, and GSM networks. Due to the substantial signal attenuation expected over this distance, this cable is a mandatory component for large-scale installations and must be used exclusively with advanced, high-power booster systems to ensure viable signal strength and system performance. It is not suitable for use with basic booster models.

60m Cable for 5G, 4G, GSM, and 3G COAX-7D-FB-60M

This 60-meter physical foam coaxial cable is designed for extensive professional installations in telephony, broadcasting, and networking. It features a 50-ohm impedance and is fully compatible with all our 5G, 4G, 3G, and GSM mobile signal boosters. Given the extreme length, significant signal loss is a critical factor. Therefore, this cable is intended for use only with advanced, high-power repeaters specifically designed to handle such attenuation. It is not suitable for basic booster models and is essential for large-scale, long-distance signal distribution systems.

100m IP55-Rated Coaxial Cable for 5G, 4G, GSM & 3G (COAX-7D-FB-100M)

This 100-meter, IP55-rated physical foam coaxial cable is engineered for long-distance, rugged applications including telephony, video, and data transmission. With a 50-ohm impedance, it is fully compatible with all our 5G, 4G, 3G, and GSM mobile signal boosters. The IP55 rating ensures protection against dust and water jets, making it suitable for demanding outdoor or industrial runs. Due to the extreme signal attenuation over this distance, this cable is a critical component for large-scale deployments and is strictly recommended for use only with modern, high-power amplifiers to maintain viable signal integrity. It is not compatible with basic booster models.

Window Jumper Cable NS-WJ-05

The Window Jumper is a very thin, low-loss RF coaxial cable designed to pass through window frames without drilling which makes it perfect for rental properties or protected buildings. It provides a seamless connection between the outdoor antenna and the signal booster, with minimal signal loss to ensure optimal repeater performance.

Lightning Surge Protector NS-LSP

A lightning surge protector is a device designed to prevent the signal booster system from being damaged in the case if lightning strikes the outside antenna. If you live in a region prone to thunderstorms that will be a good idea to use a lightning protector between the outside antenna and the booster in order to protect it from a breakdown. A grounding wire is shipped with the device. The Ingress Protection Code is IP55. Here you can find a step-by-step plan for installing a protector.

Connector for 3D-FB cable

Ensure optimal performance from your signal booster with this reliable connector for 3D-FB cable. It is engineered to minimize signal power loss, guaranteeing excellent signal clarity and transmission efficiency. The connector features a universal design, making it compatible with a wide range of mobile phone signal booster models available on the market for easy and versatile integration.

Connector for 5D-FB cable

Maximize your signal booster's efficiency with this high-performance connector for 5D-FB cable. It is precisely engineered to prevent signal power loss, ensuring optimal performance and reliable signal strength. This connector features a universal design, offering broad compatibility with a wide range of mobile phone signal booster models for seamless and versatile system integration.

Connector for 7D-FB cable

Ensure peak performance from your signal booster with this reliable connector for 7D-FB cable. It is specifically engineered to minimize signal power loss, guaranteeing strong signal strength and maximum booster efficiency. This connector features a universal design, making it compatible with a wide array of mobile phone signal booster models on the market for easy and versatile installation.

Connector adapters N-male to SMA-male

These high-quality N-Male to SMA-Male connector adapters simplify the installation of any mobile signal booster kit by enabling seamless connections between different components. Built to be weather-resistant, they are suitable for both indoor and outdoor use, ensuring system reliability in various environments. Their precision engineering guarantees minimal signal power loss, preserving optimal signal strength and booster performance.

N-Male to SMA-Female Connector Adapters

These N-Male to SMA-Female connector adapters facilitate easy and versatile integration of all components within any mobile signal booster kit. Engineered for durability and weather resistance, they are perfectly safe for reliable outdoor installation. Their high-quality construction ensures minimal signal power loss, maintaining optimal signal integrity and maximizing the performance of your booster system.

Connector adapter N-female to SMA-male

These N-Female to SMA-Male connector adapters are designed for simple and reliable integration of components in any mobile signal booster kit. Built with weather-resistant materials, they are suitable for durable outdoor use, ensuring consistent performance in various conditions. Their high-quality precision engineering guarantees minimal signal power loss, preserving signal strength and maximizing the overall efficiency of your booster system.

Connector adapter N-female to N-female

These N-Female to N-Female connector adapters provide a simple and effective solution for extending or connecting coaxial cables within any mobile signal booster kit. Engineered with weather-resistant properties, they are fully suitable for reliable outdoor installation, ensuring consistent performance in all conditions. Their high-quality, precision construction is designed to minimize signal power loss, maintaining optimal signal integrity and maximizing the efficiency of your booster system.

Connector adapter N-male to N-male

These N-Male to N-Male connector adapters provide a robust and reliable link for extending cable runs or connecting components in any mobile signal booster system. Built with weather-resistant materials, they are designed for durable outdoor use, ensuring stable performance in various environmental conditions. Their high-precision engineering guarantees minimal signal power loss, preserving signal strength and maximizing the overall efficiency of your booster installation.

5V2A vehicle power supply NS-PS-5V

The Nikrans NS-PS-5V is a compact and lightweight 5V/2A vehicle power supply designed for universal use in any car, truck, or van. It plugs directly into a standard cigarette lighter socket, providing a reliable 10W power source. This unit is specifically engineered to be fully compatible with all GSM, 3G, and 4G mobile signal boosters from our product line, while also serving as a versatile charger for most in-vehicle electronic devices.

24V/5V or 12V/5V power adapter NS-PS-12V

The Nikrans NS-PS-12V is a high-quality, configurable power adapter designed for cellular signal boosters. It plugs into a standard wall outlet and features a selectable input, allowing you to choose between 12V or 24V input to deliver a stable 5V output. This ensures the safe and optimal operation of your device. The adapter is universally compatible with all cell phone signal repeaters featured in our catalog, providing a reliable power solution for your specific setup.

Power Supply NS-PS-5V2A

The Nikrans NS-PS-5V2A is a compact, lightweight, and reliable power adapter designed for use with standard household outlets. It efficiently converts AC power to a stable 5V/2A (10W) DC output, making it an ideal power source for a wide range of electronic devices. This includes all 5G, 4G, 3G, and GSM signal boosters available on our website. Its durable construction ensures dependable performance in home, office, and various other indoor environments.

Power Supply NS-PS-5V3A

The Nikrans NS-PS-5V3A is a robust and compact power adapter designed for standard household outlets. It delivers a stable 5V/3A (15W) DC output, providing ample power for a wide range of electronic devices. This includes all 5G, 4G, 3G, and GSM signal boosters featured on our website. Its durable and lightweight design ensures reliable performance, making it an ideal power solution for home, office, and various other settings.

Power Supply NS-PS-12V5A

The Nikrans NS-PS-12V5A is a high-capacity power adapter that plugs into standard household outlets to deliver a robust 12V/5A (60W) DC output. This makes it perfectly suited for powering a wide array of electronic equipment, including all 5G, 4G, 3G, and GSM signal boosters listed on our website. Combining a durable build with a lightweight design, it is a reliable and versatile power solution for demanding applications in home, office, and commercial environments.

Power Supply NS-PS-24V5A

The Nikrans NS-PS-24V5A is a high-performance power adapter that connects to standard wall outlets to provide a powerful and stable 24V/5A DC output. It is engineered to reliably power demanding electronic equipment, including all 5G, 4G, 3G, and GSM signal boosters featured in our catalog. Despite its high power rating, it maintains a lightweight and durable design, making it an excellent and robust choice for residential, institutional, office, and various other professional environments.